Showing posts with label hardware. Show all posts
Showing posts with label hardware. Show all posts

Wednesday, 28 May 2014

iPad Basics: Do You Need A Stylus?

Strictly speaking, and in my humble opinion, no you don't. Presuming you are equipped with a Mk1 finger, you should get along just fine for the majority of iPad tasks. For those odd occasions, or if you're artistic for example, a stylus may help you get more out of your iPad experience. 

Once you've decided you either want or need a stylus, the next question is what sort to buy? There are many different models out there, the vast majority of which fall into two broad categories: standard or fine-point.

By far the largest group is the standard capacitive stylus. These tend to have reasonably large rubber or fabric tips and are perfectly good for most stylus-related tasks. There are fewer fine-point styluses on the market, and where they do exist they tend to be much more expensive however, a fine-point stylus can give a more precise result than either a standard stylus or Mk1 finger in the right circumstances.

Regarding prices, standard capacitive styluses run from a couple of pounds upwards, whereas fine-point styluses tend to start around the fifteen pounds mark, prices increasing dependant upon what sort of extra functionality (bluetooth connectivity, pressure sensitivity, etc) is built in; my personal favourite is the Adonit Jot Pro, more on that later.

OK, so how do you decide which of the myriad styluses to buy? The easiest decision is between standard or fine-point, and unless you particularly require precision, a standard stylus will almost certainly fit the bill, and won't hurt the wallet too much either. Should you have decided a fine-point stylus is the one for you, you'll need to decide if bluetooth connectivity or pressure sensitivity are of importance to you. If you're an artist they may be, if not you'll probably get along just as well with something like the Jot Pro or its baby brother, the Jot Mini. A Jot Pro will run you somewhere around the £20 mark, with a Jot Mini coming in around £15 if you shop around, though if you want bluetooth connectivity and pressure sensitivity be prepared to stump up close to £50 for a Jot Touch 4 stylus.

My personal favourite of the three is the Jot Pro, probably because that's the one I've got, though this choice was based on a fair amount of research prior to handing over my hard-earned. I intend writing a separate review (with pictures) of the Jot Touch at a later date, for now I'll just run you through the basics.

The first thing that struck me was the aluminium barrel, in my case finished in a gunmetal shade, which to be has a hint of brown about it. Pleasantly weighty, the Jot Pro has a rubberised grip section so it remains snugly where you want it to be, which can be a blessing if you're working on something with particularly fine detail. The business end, more on that in a moment, is protected with a screw-on cap that threads onto the other end when the stylus is in use; no more lost caps.

The business end is the interesting bit. In order to work with the iPad’s capacitive screen, the business end of the Jot Pro features a small metal ball seated in a little clear plastic disc; it apparently needs this surface area in order for the screen to recognise it's there. The clear plastic disc is great because it doesn't obscure you're view while you work, though I've read a few reviews that suggest these discs are easily lost, so it might be an idea for you to do what I did when I purchased my Jot Pro, pick yourself up a pack of spare discs at the same time; these can be had for a few pounds if you shop around.

So there you go, if you just want a bog-standard stylus for everyday use, any capacitive stylus will do, if you need so wing with more precision, you could do a lot worse than invest in a Adonit Jot Pro. Try one out and let me know what you think.

<tap>

Friday, 16 May 2014

Review: Cooler Master ¥en Folio iPad Mini Case

OK, so you've shelled out a couple of hundred quid (or more) for your shiny new iPad Mini, but what’s the plan? Cart it around in your bag unprotected? No, didn't think so. You'll be in the market for a protective case for it then...

I was in exactly the same position recently when I chanced upon a listing for an interesting looking iPad Mini case, the ¥en Folio from Cooler Master. Firstly, it’s a full wrap-around case so the back of your iPad is protected as well as the screen, it's available in five colours: black, grey, silver, blue and bronze, but the best part is that it's a multi-position case.

Cooler Master ¥en Folio iPad Mini Case
Photos copyright Cooler Master. All rights reserved.

By multi-position I mean that by using a bit of nifty origami, the case folds to allow you to stand your iPad Mini up in four different ways. There's a typing setting, two landscape viewing settings and one portrait viewing setting, each of which is ideal for writing, reading or watching movies, etc. The inner surface of the front flap is lined with a black mock suede to protect your iPad's screen, while the back (the part your iPad clips into) has cutouts for all the relevant buttons and speakers, meaning you can use and charge your iPad without having to take it out of its case. The back half is constructed of sturdy plastic and provides a decent amount of protection should you drop your iPad; don't ask me how I know this!

All in all this is a very impressive case, especially when you consider the price paid. The ¥en case retails for £29.99, but a bit of judicious shopping around online got the price down to between £1.95-£5.95, depending on the colour chosen. All round win in my book.

<tap>